Questa pagina non è ancora tradotta; è mostrata in inglese.
GPS, APRS, and data
Open Main Menu > GPS, APRS, and Data (OK, 7 from Home).
| Card | Opens |
|---|---|
| 1 — Position | Position, GPS fix, and satellites |
| 2 — APRS | APRS status, position source, and beacon controls |
| 3 — ARS & LRRP | Registration and GPS-request status |
Position and time
Enable GPS in Settings > Location and allow a fix. Position pages distinguish a GPS fix from a configured fixed position. The clock uses GPS or retained hardware time. Set UTC offset for the displayed local time; change it when your local offset changes.
APRS
Set your radio name to begin with your callsign. The APRS page shows whether the callsign, position, and route are usable. Choose the region/frequency and Send via route before enabling automatic beacons. AFSK sends on the configured FM APRS frequency; DMR sends to the configured DMR gateway destination.
| Control | Use |
|---|---|
| Send position now | Request a single position transmission |
| Automatic beacons | Enable or disable scheduled beacons |
| Frequency | Select the regional APRS frequency |
| Power and Path | Set the FM beacon power and digipeater path |
| Interval and SmartBeaconing | Control periodic and movement-based beacon timing |
| Position | Select the position source and inspect the fixed position |
| Stations heard | Inspect decoded APRS stations |
Check the frequency and destination before transmitting. APRS requires appropriate amateur authorization. The firmware waits for a clear channel; an unavailable position or invalid callsign can prevent sending. To receive FM APRS, tune an FM channel or VFO exactly to the configured APRS frequency.
ARS and LRRP
The dashboard shows registration attempts, retry/refresh state, and active location requests. Opening it does not send a packet. Register Now schedules registration when the channel is eligible and clear. Edit Server ID to select the registration destination; 0 disables ARS.
Answer GPS requests controls LRRP replies. Turning it off clears active subscriptions and pending reports; turning it back on permits new requests. Subscription cards show the requester, interval, optional distance threshold, and the next check or GPS status. A next-check time is an estimate.
Computer connections
Host data services use the programming cable. See Hotspot and host connections. The shared APRS specification documents protocol details and advanced configuration.