Esta página aún no está traducida; se muestra en inglés.

Messages

Messages, call alert, and radio check use DMR data. Set your DMR ID and select a DMR channel you can transmit on. These data services do not require the voice codec.

Conversations

Open Main Menu > Messages (OK, 2 from Home). The newest conversation appears first. Select one to read the full incoming and outgoing messages. Press OK in a conversation to compose a reply. Private-message replies address the sender; group-message replies address the talkgroup.

Saved conversation list Incoming and outgoing conversation bubbles Older messages in a conversation

The current firmware includes persistent message history. Stored incoming and outgoing messages survive a restart; outgoing entries include the send result. Times use GPS or valid hardware time and the saved UTC offset. Entries without a captured time show --:--. The archive stores message text in plaintext.

A received-message banner can be opened with # while it is visible. Live inbox storage is separate from the archive and holds only the latest messages in memory. If history is unavailable, that inbox is cleared when power is removed.

Write and send

Open a conversation and press OK, or choose Message in a contact's actions. Select a canned reply or Write.... Press a number key repeatedly to cycle through letters. # changes letter case or selects digits; Back deletes a character and leaves when the draft is empty. OK sends up to 140 characters.

Result Meaning
Delivered to The recipient radio acknowledged the message
Sent to The message was transmitted; group messages have no recipient confirmation
No answer / Not delivered No confirmation arrived; check the channel, ID, and format before sending again

A receiving radio can display a message even when its acknowledgment does not reach the sender.

Message format

Settings > Connections > Message format selects ETSI, ETSI short, or Motorola text for outgoing messages. The radio can receive the supported formats independently of this setting. A reply uses the incoming message's format. Match the destination system when troubleshooting delivery.

Call alert and radio check

Use the destination's actions to send a call alert or check whether a radio answers. A call alert asks the recipient to respond. Radio check tests a data response; it does not establish a voice call. No response can mean an unavailable radio, mismatched channel parameters, or an unsupported service.

Ver el código fuente de esta página