Install or update

Open Install in the header, or use Firmware in CPS. Use a Chromium browser with serial-port support, such as Chrome or Edge, and the DM-32UV programming cable. Close stock CPS, terminal programs, and other tabs using the same port.

Before installing

  • Save your stock codeplug with its programming software and keep a copy of the manufacturer's firmware.
  • Charge the battery. Keep power and the cable connected throughout a write.
  • Keep every backup the installer downloads. A firmware image alone is not a backup of your channels and settings.

The installer checks the image and its manifest before writing. Use DM32+ release files intended for this radio. The AMBE voice codec is not distributed in the release image. Follow the installer when it asks to preserve the codec from the radio or extract it from a supported stock firmware file. File processing runs on your computer. Without a usable codec, analog FM and DMR data can work, but DMR voice cannot.

Choose firmware

Choice Meaning
Bundled The firmware included with this copy of the site or portable CPS, when available
Stable The latest stable release published by this project
Development A development prerelease
Testing A release candidate intended for testing

Online channels need an internet connection. A channel with no matching published image is unavailable. Semantic release tags use forms such as v1.0.0, v1.0.0-dev.1, and v1.0.0-rc.1. The installer uses the published product image; it does not offer upstream Amateur, Commercial, or Custom builds.

Install

  1. Choose the install action and the firmware channel.
  2. Select the programming cable's serial port when the browser asks.
  3. Follow the current-firmware and backup steps. Save the downloaded files before continuing.
  4. Supply a supported stock firmware file if the installer needs it for the codec.
  5. Enter update mode only when prompted: switch off, hold PTT and SK1 (the side key just below PTT), then switch on. The green LED lights in the bootloader.
  6. Wait for writing and verification to finish. Follow any instruction to restart or reconnect.
  7. Open CPS, read the radio, check your DMR ID and channels, and save a codeplug file.

If migration cannot recover your channels, import your saved codeplug in CPS and check the conversion before writing. Manufacturer CPS files are not interchangeable with every supported import format. CPS identifies the file and reports what it can use.

Update

Start with DM32+ running normally and choose Update. Connect, choose the desired release channel, and follow the installer's instructions. Save a current codeplug before updating. Check the installed version in Settings > Advanced > About afterward.

The Releases page contains this project's downloads and release notes.

If something goes wrong

Do not repeatedly write unrelated images or erase calibration data. Close applications holding the port, check the cable, and follow Troubleshooting. If the new firmware will not start, the original bootloader remains the recovery path: enter update mode and use a compatible image or your stock firmware.

Keep your stock firmware and stock codeplug for returning to the manufacturer's software. Advanced migration and serial-loader procedures are in the source reference.

Advanced: rfoundry on the command line

If you download a manual install kit, extract the entire kit and follow its generated README. Its commands refer to the included image, manifest, tools, and any codec source you selected. Keep those files together. Use the serial-cable procedure for this radio. Do not substitute the native-USB DFU instructions from another model.

View the source of this page